tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 1 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? low reverse current level ? very high stability ?low noise ? aec-q101 qualified ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 36 v test current i zt 2; 5 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity tzx-series tzx-series-tap 10 000 per ammopack (52 mm tape) 30 000/box tzx-series tzx-series-tr 10 000 per 14" reel (52 mm tape) 30 000/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions do-35 125 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipati on l = 4 mm, t l = 25 c p tot 500 mw zener current i z p tot /v z ma thermal resistance junction to ambient air l = 4 mm, t l =constant r thja 300 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c forward voltage (max.) i f = 200 ma v f 1.5 v
tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 2 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i r at v r i r at v r (1) z z at i zt1 v ma a v a v ? min. nom. max. max. max. max. tzx2v4a 2.3 2.4 2.5 5 5 0.5 50 1 100 tzx2v4b 2.4 2.4 2.6 5 5 0.5 50 1 100 tzx2v7a 2.5 2.7 2.7 5 5 0.5 10 1 100 tzx2v7b 2.6 2.7 2.8 5 5 0.5 10 1 100 tzx2v7c 2.7 2.7 2.9 5 5 0.5 10 1 100 tzx3v0a 2.8 3.0 3 5 5 0.5 6 1 100 tzx3v0b 2.9 3.0 3.1 5 5 0.5 6 1 100 tzx3v0c 3 3.0 3.2 5 5 0.5 6 1 100 tzx3v3a 3.1 3.3 3.3 5 5 1 2 1 100 tzx3v3b 3.2 3.3 3.4 5 5 1 2 1 100 tzx3v3c 3.3 3.3 3.5 5 5 1 2 1 100 tzx3v6a 3.4 3.6 3.6 5 5 1 2 1 100 tzx3v6b 3.5 3.6 3.7 5 5 1 2 1 100 tzx3v6c 3.6 3.6 3.8 5 5 1 2 1 100 tzx3v9a 3.7 3.9 3.9 5 5 1 2 1 100 tzx3v9b 3.8 3.9 4 5 5 1 2 1 100 tzx3v9c 3.9 3.9 4.1 5 5 1 2 1 100 tzx4v3a 4 4.3 4.2 5 5 1.5 1 1 100 tzx4v3b 4.1 4.3 4.3 5 5 1.5 1 1 100 tzx4v3c 4.2 4.3 4.4 5 5 1.5 1 1 100 tzx4v3d 4.3 4.3 4.5 5 5 1.5 1 1 100 tzx4v7a 4.4 4.7 4.6 5 5 2 6 2 100 tzx4v7b 4.5 4.7 4.7 5 5 2 5 2 100 tzx4v7c 4.6 4.7 4.8 5 5 2 4 2 100 tzx4v7d 4.7 4.7 4.9 5 5 2 3 2 100 tzx5v1a 4.8 5.1 5 5 5 2 2 2 100 tzx5v1b 4.9 5.1 5.1 5 5 2 2 2 100 tzx5v1c 5 5.1 5.2 5 5 2 2 2 100 tzx5v1d 5.1 5.1 5.3 5 5 2 2 2 100 tzx5v6a 5.2 5.6 5.5 5 5 2 1 2 40 tzx5v6b 5.3 5.6 5.6 5 5 2 1 2 40 tzx5v6c 5.4 5.6 5.7 5 5 2 1 2 40 tzx5v6d 5.5 5.6 5.8 5 5 2 1 2 40 tzx5v6e 5.6 5.6 5.9 5 5 2 1 2 40 tzx6v2a 5.7 6.2 6 5 1 3 3 4 15 tzx6v2b 5.8 6.2 6.1 5 1 3 3 4 15 tzx6v2c 6 6.2 6.3 5 1 3 3 4 15 tzx6v2d 6.1 6.2 6.4 5 1 3 3 4 15 tzx6v2e 6.3 6.2 6.6 5 1 3 3 4 15 tzx6v8a 6.4 6.8 6.7 5 1 3.5 2 4 15 tzx6v8b 6.6 6.8 6.9 5 1 3.5 2 4 15 tzx6v8c 6.7 6.8 7 5 1 3.5 2 4 15 tzx6v8d 6.9 6.8 7.2 5 1 3.5 2 4 15
tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 3 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tzx7v5a 7 7.5 7.3 5 1 5 30 6.65 15 tzx7v5b 7.2 7.5 7.6 5 1 5 30 6.84 15 tzx7v5c 7.3 7.5 7.7 5 1 5 30 6.94 15 tzx7v5d 7.5 7.5 7.9 5 1 5 30 7.13 15 tzx7v5x 7.07 7.5 7.45 5 1 5 30 6.72 15 tzx8v2a 7.7 8.2 8.1 5 1 6.2 0.1 7.32 20 tzx8v2b 7.9 8.2 8.3 5 1 6.2 0.1 7.5 20 tzx8v2c 8.1 8.2 8.5 5 1 6.2 0.1 7.7 20 tzx8v2d 8.3 8.2 8.7 5 1 6.2 0.1 7.98 20 tzx9v1a 8.5 9.1 8.9 5 1 6.8 0.04 8.08 20 tzx9v1b 8.7 9.1 9.1 5 1 6.8 0.04 8.27 20 tzx9v1c 8.9 9.1 9.3 5 1 6.8 0.04 8.46 20 tzx9v1d 9.1 9.1 9.5 5 1 6.8 0.04 8.65 20 tzx9v1e 9.3 9.1 9.7 5 1 6.8 0.04 8.84 20 tzx10a 9.5 10 9.9 5 1 7.5 0.04 9.03 25 tzx10b 9.7 10 10.1 5 1 7.5 0.04 9.22 25 tzx10c 9.9 10 10.3 5 1 7.5 0.04 9.41 25 tzx10d 10.2 10 10.6 5 1 7.5 0.04 9.69 25 tzx11a 10.4 11 10.8 5 1 8.2 0.04 9.88 25 tzx11b 10.7 11 11.1 5 1 8.2 0.04 10.2 25 tzx11c 10.9 11 11.3 5 1 8.2 0.04 10.4 25 tzx11d 11.1 11 11.6 5 1 8.2 0.04 10.5 25 tzx12a 11.4 12 11.9 5 1 9.5 0.04 10.8 35 tzx12b 11.6 12 12.1 5 1 9.5 0.04 11 35 tzx12c 11.9 12 12.4 5 1 9.5 0.04 11.3 35 tzx12d 12.2 12 12.7 5 1 9.5 0.04 11.6 35 tzx12x 11.44 12 12.03 5 1 9.5 0.04 10.9 35 tzx13a 12.4 13 12.9 5 1 10 0.04 11.8 35 tzx13b 12.6 13 13.1 5 1 10 0.04 12 35 tzx13c 12.9 13 13.4 5 1 10 0.04 12.3 35 tzx14a 13.2 14 13.7 5 1 11 0.04 12.5 35 tzx14b 13.5 14 14 5 1 11 0.04 12.8 35 tzx14c 13.8 14 14.3 5 1 11 0.04 13.1 35 tzx15a 14.1 15 14.7 5 1 11.5 0.04 13.4 40 tzx15b 14.5 15 15.1 5 1 11.5 0.04 13.8 40 tzx15c 14.9 15 15.5 5 1 11.5 0.04 14.2 40 tzx15x 14.35 15 15.09 5 1 11.5 0.04 13.6 40 tzx16a 15.3 16 15.9 5 1 12 0.04 14.5 45 tzx16b 15.7 16 16.5 5 1 12 0.04 14.9 45 tzx16c 16.3 16 17.1 5 1 12 0.04 15.5 45 tzx18a 16.9 18 17.7 5 1 13 0.04 16.1 55 tzx18b 17.5 18 18.3 5 1 13 0.04 16.6 55 tzx18c 18.1 18 19 5 1 13 0.04 17.2 55 tzx20a 18.8 20 19.7 2 1 15 0.04 17.9 60 tzx20b 19.5 20 20.4 2 1 15 0.04 18.5 60 tzx20c 20.2 20 21.2 2 1 15 0.04 19.2 60 tzx22a 20.9 22 21.9 2 1 17 0.04 19.9 65 electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i r at v r i r at v r (1) z z at i zt1 v ma a v a v ? min. nom. max. max. max. max.
tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 4 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? additional measurement of voltage group tzm9v1 to tzx36, i r at 95 % v zmin. ? 40 na at t j = 25 c (1) additional measurement basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - thermal resistance vs. lead length fig. 2 - total power dissipation vs. ambient temperature tzx22b 21.6 22 22.6 2 1 17 0.04 20.5 65 tzx22c 22.3 22 23.3 2 1 17 0.04 21.2 65 tzx24a 22.9 24 24 2 1 19 0.04 21.8 70 tzx24b 23.6 24 24.7 2 1 19 0.04 22.4 70 tzx24c 24.3 24 25.5 2 1 19 0.04 23.1 70 tzx24x 22.61 24 23.77 2 1 19 0.04 21.5 70 tzx27a 25.2 27 26.6 2 1 21 0.04 23.9 80 tzx27b 26.2 27 27.6 2 1 21 0.04 24.9 80 tzx27c 27.2 27 28.6 2 1 21 0.04 25.8 80 tzx27x 26.99 27 28.39 2 1 21 0.04 25.6 80 tzx30a 28.2 30 29.6 2 1 23 0.04 26.8 100 tzx30b 29.2 30 30.6 2 1 23 0.04 27.7 100 tzx30c 30.2 30 31.6 2 1 23 0.04 28.7 100 tzx30x 29.02 30 30.51 2 1 23 0.04 27.6 100 tzx33a 31.2 33 32.6 2 1 25 0.04 29.6 120 tzx33b 32.2 33 33.6 2 1 25 0.04 30.6 120 tzx33c 33.2 33 34.5 2 1 25 0.04 31.5 120 tzx36a 34.2 36 35.7 2 1 27 0.04 32.5 140 tzx36b 35.3 36 36.8 2 1 27 0.04 33.5 140 tzx36c 36.4 36 38 2 1 27 0.04 34.6 140 tzx36x 35.36 36 37.19 2 1 27 0.04 33.6 140 electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i r at v r i r at v r (1) z z at i zt1 v ma a v a v ? min. nom. max. max. max. max. 95 9611 0 5 10 15 0 100 200 300 400 500 20 ll r thja - therm. resist. j u nction am b ient (k/w) i - lead length (mm) t l = constant 0 120 160 0 100 300 400 500 600 p tot - total po w er dissipation (mw) t am b - am b ient temperat u re (c) 200 95 9602 200 80 40
tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 5 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical change of w orking voltage under operating conditions at t amb = 25 c fig. 4 - typical change of working voltage vs. junction temperature fig. 5 - temperature coefficient of vz vs. z-voltage fig. 6 - diode capacitance vs. z-voltage fig. 7 - forward current vs. forward voltage fig. 8 - z-current vs. z-voltage 10 15 20 1 10 100 1000 v z - v oltage change (m v ) v z - z- v oltage ( v ) 25 95 9598 t j = 25 c i z = 5 ma 0 5 - 60 60 120 180 0.8 0.9 1.0 1.1 1.2 1.3 v ztn - relative voltage change t j - junction temperature (c) 240 95 9599 0 v ztn = v zt /v z (25 c) 0 tk vz = 10 x 10 -4 /k 8 x 10 -4 /k 2 x 10 -4 /k 6 x 10 -4 /k 4 x 10 -4 /k - 4 x 10 -4 /k - 2 x 10 -4 /k - 5 0 5 10 15 v z - z- v oltage ( v ) 95 9600 i z = 5 ma 0 10 203040 50 tk v z - temperat u re coefficient of v z (10 -4 /k) 10 15 0 50 100 150 200 c d - diode capacitance (pf) v z - z- v oltage ( v ) 25 95 9601 20 t j = 25 c v r = 2 v 0 5 0 0.2 0.4 0.6 0.8 0.001 0.01 0.1 1 10 100 1.0 95 9605 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) t j = 25 c 8 20 95 9604 0 20 40 60 80 100 i z - z-c u rrent (ma) p tot = 500 mw t am b = 25 c 046 12 v z - z- v oltage ( v )
tzx-series www.vishay.com vishay semiconductors rev. 2.3, 06-may-13 6 document number: 85614 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - z-current vs. z-voltage fig. 10 - differential z-resistance vs. z-voltage fig. 11 - thermal response package dimensions in millimeters (inches): do-35 15 20 25 30 0 10 20 30 40 50 i z - z-c u rrent (ma) v z - z- v oltage ( v ) 35 95 9607 p tot = 500 mw t am b = 25 c 0 101520 1 10 100 1000 25 95 9606 t j = 25 c i z = 1 ma 5 ma 10 ma v z - z- v oltage ( v ) r z - differential z-resistance ( ) 5 1 10 100 1000 z thp - thermal resistance for p u lse cond. (k/w) t p - p u lse length (ms) 95 9603 10 -1 10 0 10 1 10 2 t p /t = 0.5 t p /t = 0.2 t p /t = 0.1 t p /t = 0.05 t p /t = 0.02 t p /t = 0.01 single p u lse r thja = 300 k/w t = t j max. - t am b i zm = (- v z + ( v z 2 + 4r zj x t/z thp ) 1/2 )/(2r zj ) 94 9366 re v . 6 - date: 19. decem b er 2011 doc u ment no.: sb- v -3906.04-031(4) 26 min. [1.024] 3.9 max. [0.154] 26 min. [1.024] cathode identification 1.7 [0.067] 1.3 [0.050] 3.1 min. [0.120] ? 0.6 max. [0.024] ? 0.4 min. [0.015]
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
